Products

Low Density Cartridge Heaters provide localized heating in processes Requiring close temperature control such as: Hot stamping Plastic injection Glue guns Wax pots Other low-temperature applications Packaging and labelling machines High Watt Density Cartridge Heaters Come: SS 304 & SS 316 construction Watt Density: 12 watt/sq.cm Low Voltage: 12 or 24 Volt Cartridge Heaters in Brass: SS 304 sheath with watt density of 4 watts/sq.cm Max Temperature: SS tube 400 °C, for Brass tubes 200°C

Hi-Density Cartridge Heaters (swaged) are the solution for High temperature applications. Hi-Density Heaters provide localized Heating in processes requiring close temperature control such as: Dies,Molds,Platens,Labeling Hot stamping, Bag Sealing Packaging equipment Plastic extruders Injection molding mach. Medical equipment High Watt Density Cartridge Heaters Come: SS 304 & SS 316 construction Watt Density: 12 watt/sq.cm Low Voltage: 12 or 24 Volt Cartridge Heaters in Brass: SS 304 sheath with watt density of 4 watt /sq.cm Max Temperature: SS tube 400 °C, for Brass tubes 200°C

Oil Immersion Heaters are made in tubular & cartridge types. They can be Manufactured with threaded bushings of flanges. Different sheath materials Like stainless steel, Incolony, Copper, Titanium are used depending on Application requirements. Hot Air Dryers Dehumidifying Dryers Heat Exchange System Water And Water Solutions Steam Tables Air Heating Water And Water Solutions Steam Tables Air Heating High Watt Density Cartridge Heaters Come: SS 304 & SS 316 construction Watt Density: 12 watt/sq.cm Low Voltage: 12 or 24 Volt Cartridge Heaters in Brass: SS 304 sheath with watt density of 4 watt /sq.cm Max Temperature: SS tube 400 °C, for Brass tubes 200°C

Industrial Water Heaters are Disconnect power to heater before servicing. There should be no body contact with the water while the heater is in the water. Under NO circumstances should this heater be turned on unless the system is full of water. Immersion section of heater made of 316 Stainless Steel Cold riser extends to the top of container where control housing is located Cord set with 3-wire grounding plug is included for easy installation and wiring Hi-limit cut switch set to 125°F (+/-4°) Stainless Steel mounting bracket also supplied for easy mounting Pilot light and on-off switch provided High Watt Density Cartridge Heaters Come: SS 304 & SS 316 construction Watt Density: 12 watt/sq.cm Low Voltage: 12 or 24 Volt Cartridge Heaters in Brass: SS 304 sheath with watt density of 4 watt /sq.cm Max Temperature: SS tube 400 °C, for Brass tubes 200°C

Alkaline Immersion Heater is made out of S.S316L; it is used for Heating alkaline solutions, wax, paraffin, Solvent vapor cleaning, salt baths and soft metal melting. Most Alkaline cleaning solutions, detergents and Chemicals are normally corrosive to mild steel. Thus, for heating water or alkali solutions, wax, paraffin, and fuel Oil pre-heating vegetable or mineral Oils, picking, quenching and rinsing solution soft metal melting, solvent Vapors cleaning, electroplating solution, chromic phosphoric, our alkaline heaters are used. High strength Utmost precision Low maintenance High Watt Density Cartridge Heaters Come: SS 304 & SS 316 construction Watt Density: 12 watt/sq.cm Low Voltage: 12 or 24 Volt Cartridge Heaters in Brass: SS 304 sheath with watt density of 4 watt /sq.cm Max Temperature: SS tube 400 °C, for Brass tubes 200°C

Finned Tubular Heaters provide rapid heat transfer for natural convection or forced air space heating in Industrial process air heating systems. Finned Tubular heaters start out as a standard tubular heater with The fins being attached on a custom built Finning machine. Plain tubular heaters are available in straight Lengths or bent as per customer’s requirement with threaded stud connection at both ends. Finned tubular heaters have enlarged surface area to help faster dissipation of heat. Forced air heating Thermal forming machines Direct immersion in liquids Comfort radiant heaters Welded, brazed or clamped to tanks and pipes Hot runner molds Combination radiant and convection heater for ovens and dryer High Watt Density Cartridge Heaters Come: SS 304 & SS 316 construction Watt Density: 12 watt/sq.cm Low Voltage: 12 or 24 Volt Cartridge Heaters in Brass: SS 304 sheath with watt density of 4 watt /sq.cm Max Temperature: SS tube 400 °C, for Brass tubes 200°C

Finned tubular air heating elements are constructed like basic tubular elements with the addition of continuous spiral fins, 4-5 per inch permanently furnace brazed to the sheath. Fins greatly increase surface area and permit faster hear transfer to air, resulting in lower surface element temperatures. Drying Heat Treating Annealing Load Banks Curing High Watt Density Cartridge Heaters Come: SS 304 & SS 316 construction Watt Density: 12 watt/sq.cm Low Voltage: 12 or 24 Volt Cartridge Heaters in Brass: SS 304 sheath with watt density of 4 watt /sq.cm Max Temperature: SS tube 400 °C, for Brass tubes 200°C

Manifold Heaters have always been a major highlight of our product list since the time of its conception. We have been known in the market for quality, as a result these products checked multiple times as per the industrial standards of quality. These products are made from the best quality raw materials to ensure better performance without any flaws. These products are also available in a customized form for the benefit of ours esteemed clients. These products are also insulated properly to prevent any loss of heat. Hot runner systems Transportation Packaging Building and construction Toys Electrical Electronics Furniture and furnishings Consumer and institutional Industrial and machinery Medical High Watt Density Cartridge Heaters Come: SS 304 & SS 316 construction Watt Density: 12 watt/sq.cm Low Voltage: 12 or 24 Volt Cartridge Heaters in Brass: SS 304 sheath with watt density of 4 watt /sq.cm Max Temperature: SS tube 400 °C, for Brass tubes 200°C

Hot Runner Coil Heaters to our clients. These are made up of nickel chrome resistance wire to ensure faster and efficient heat transfer. Our offered range of Hot Runner Heaters and Bushes manufactured using high quality raw material and advanced technology. Molds & Dies Nozzle heating Sprue Bushing High Watt Density Cartridge Heaters Come: SS 304 & SS 316 construction Watt Density: 12 watt/sq.cm Low Voltage: 12 or 24 Volt Cartridge Heaters in Brass: SS 304 sheath with watt density of 4 watt /sq.cm Max Temperature: SS tube 400 °C, for Brass tubes 200°C

Acting as a superior alternative to Glass hearers, these Titanium Heaters feature titanium construction which makes it durable as well as suitable for hydrochloric acid among others. Coming with titanium heating element, adjustable temperature setting, easy to read temperature indicator and compact design, these heaters finds wide usage in different industrial applications. Some of the advantages these heaters come with include superior temperature sensor, and usage suitability in fresh and saltwater areas. Some end applications the heaters find use in include Chemical industry, for anodizing & plating baths, for nitric acid solutions and others. Glass Heater Commonly used in plating plant Compact design Easy to use Long functional life Titanium Heater Longer service life Low maintenance Outstanding performance Tough construction High Watt Density Cartridge Heaters Come: SS 304 & SS 316 construction Watt Density: 12 watt/sq.cm Low Voltage: 12 or 24 Volt Cartridge Heaters in Brass: SS 304 sheath with watt density of 4 watt /sq.cm Max Temperature: SS tube 400 °C, for Brass tubes 200°C

Heating Element is offered by us to match up with the increasing demands of the market. These heaters are of replaceable type and are highly suitable for various applications that include oil heating, geyser, chemical and water heating. Our range of Porcelain Heating Element is made out of Open helical coils of high resistance wire and is covered with fluted refractory bobbins. Bobbin Heater is offered by us to meet with the rising demands of our respected clients. These are made using high quality stainless steel tube with the diameter of 35 mm to 50 mm. The terminals of heaters are covered with a cap. Our range of product is easily fitted with projection for the installation purpose. We offer various customized solution for Bobbin Acid Immersion Heaters. Geyser Water Heating Oil Heating Chemical Heating High Watt Density Cartridge Heaters Come: SS 304 & SS 316 construction Watt Density: 12 watt/sq.cm Low Voltage: 12 or 24 Volt Cartridge Heaters in Brass: SS 304 sheath with watt density of 4 watt /sq.cm Max Temperature: SS tube 400 °C, for Brass tubes 200°C

Ceramic heaters are medium-to-high temperature heaters that can deliver up to 1200°F. The nickel-chrome heating cores of these durable heaters are placed inside interlocking ceramic tiles that are assembled like a brick wall. A ceramic fiber insulating mat and a stainless steel jacket cover this assembly. This construction makes ceramic heaters flexible and highly energy efficient. An energized ceramic heater that operates at 1200°F internally will have around 400°F on its outside shell. Ceramic heaters consume 20 % less energy than band heaters that are not insulated. Ceramic band heaters are available with different clamping mechanisms, terminations styles, holes and cut-outs. INJECTION MOLDING MACHINES PLASTIC EXTRUDERS BLOW-MOLDING MACHINES CONTAINER, PIPE OR TANK HEATING OTHER PROCESS APPLICATIONS High Watt Density Cartridge Heaters Come: SS 304 & SS 316 construction Watt Density: 12 watt/sq.cm Low Voltage: 12 or 24 Volt Cartridge Heaters in Brass: SS 304 sheath with watt density of 4 watt /sq.cm Max Temperature: SS tube 400 °C, for Brass tubes 200°C

Mica Band heaters are available with energy saving options in various sheathing materials, viz. Aluminized Steel, Chrome Nickel Steel, Brass depending upon applications which provides the best combination of physical strength, high emissivity & good thermal conductivity to heat cylindrical parts, good for sheath temperature upto 300°C. Plastic & Rubber Processing Machinery. Widely used in Injection and Blow Molding. Extruders & Many other applications. Many other Applications. (Medical, Lab-Equipments....etc) Film Extruders High Watt Density Cartridge Heaters Come: SS 304 & SS 316 construction Watt Density: 12 watt/sq.cm Low Voltage: 12 or 24 Volt Cartridge Heaters in Brass: SS 304 sheath with watt density of 4 watt /sq.cm Max Temperature: SS tube 400 °C, for Brass tubes 200°C

Mica Nozzle heaters are available with energy saving options in various sheathing materials, viz. Aluminized Steel, Chrome Nickel Steel, Brass depending upon applications which provides the best combination of physical strength, high emissivity & good thermal conductivity to heat cylindrical parts, good for sheath temperature upto 300°C. Injection Molding Blow Molding Film Extruders Plastic & Rubber Processing machinery Plastic injection molding nozzles Laminating and printing presses Restaurant and food processing equipment Semiconductor manufacturing and wafer processing Hot metal forming dies and punches Cast-in heaters Air heating Heating in a vacuum environment Sealing and cutting bars Textile manufacturing High Watt Density Cartridge Heaters Come: SS 304 & SS 316 construction Watt Density: 12 watt/sq.cm Low Voltage: 12 or 24 Volt Cartridge Heaters in Brass: SS 304 sheath with watt density of 4 watt /sq.cm Max Temperature: SS tube 400 °C, for Brass tubes 200°C

Used when heat is needed on a flat surface, but when it is impractical to bore a hole in the plate. The flat mica heater allows heat to be distributed evenly across the surface. A much higher watt density can be achieved using these heaters than with silicone rubber mat heaters. 280°C maximum operating temperature. The heaters are best suited for fitting between 2 metal surfaces where one or both require heating, they should be adequately clamped for heat transfer and to prevent premature failure. Lamination Machinery's Rubber Molding Machinery's Ovens Sealing Machines Space heating Drying Process High Watt Density Cartridge Heaters Come: SS 304 & SS 316 construction Watt Density: 12 watt/sq.cm Low Voltage: 12 or 24 Volt Cartridge Heaters in Brass: SS 304 sheath with watt density of 4 watt /sq.cm Max Temperature: SS tube 400 °C, for Brass tubes 200°C

Strip Heaters are economical heat sources, suitable for providing heat to flat surfaces. The sheath temperature is limited to 900°F. Maximum allowable watt densities with respect to application temperatures are shown in the diagram. However, 20 Watts/in² is a safe value. In order to avoid thermal expansion issues that detach mica strip heaters from the Surfaces that they are applied to, strip heaters can be made to include several mounting holes or pressure plates that provide rigidity and improve heat transfer uniformity as well. Mica insulated strip heaters are available in many electrical termination styles, and within certain design limitations can accommodate holes and cut-outs. PACKAGING AND SEALING MACHINES FOOD TABLES AND WARMING EQUIPMENT PLASTIC EXTRUDERS BLOW-MOLDING MACHINES OVENS, HOT PLATES, INCUBATORS OTHER PROCESS APPLICATIONS High Watt Density Cartridge Heaters Come: SS 304 & SS 316 construction Watt Density: 12 watt/sq.cm Low Voltage: 12 or 24 Volt Cartridge Heaters in Brass: SS 304 sheath with watt density of 4 watt /sq.cm Max Temperature: SS tube 400 °C, for Brass tubes 200°C